Compact geometries – economical bending and cutting

The solution for compact tube geometries: Economic bending-cutting-technology from transfluid®
The solution for compact tube geometries: Economic bending-cutting-technology from transfluid®

If short compact tube geometries must be cutted after bending, the loss of material by conventional methods is extremely high. An incentive for us to think economically and technically one step further: with the newly developed combined transfluid® bending and cutting processes. It provides an effective and time saving solution for the practice. The special machine design example is interesting for the efficient fabrication of exhaust pipes.


All axes and movements of the bending machine are electrically powered. Three levels are available for bending - on a fourth level, the tube will be separated cleanly and almost without damages with knives. Tubes up to 140 x 2 mm can be bent and separated in this way, and without further after-cutting. A loading of pre-cutted parts is no longer necessary. The shortened periods ensure a very economic process and per geometric material will economize up to two times the tube diameter average.


"The impressive efficiency ensures the usable length of the tube of six meters. After loading the desired geometry and the first bend of the following geometry will be bent, "explains Gerd Nöker, managing director of transfluid®. "Our solution enables the implementation of highly sophisticated clamping surfaces and bending radii, because the machine is equipped with a boosting function.

"

The forward-looking transfluid® solutions for tube processing you can experience here:

easyFairs (07.-08.03.2012, Duisburg, Stand B26)

Tube (26-03.30.2012, Düsseldorf, Hall 05 / Stand 5G34)


We look forward to your visit!

Go back

transfluid®
Maschinenbau GmbH

Hünegräben 20-22
57392 Schmallenberg
Germany

sales@transfluid.de

+49 29 72 / 97 15 0

+49 29 72 / 97 15 11