Transfluid
transfluid - The solution for tubes

Merry Christmas

and a happy new year

The time before and around Christmas is a good opportunity to pause for a moment and remember all the good things you have experienced throughout the year, to block out the negative experiences and draw strength from the positive moments.

 

At transfluid, we can look back on another successful year with great joy and gratitude. There were many wonderful moments that marked the 35th year of transfluid. And we are grateful for this, because we know that this is not always a matter of course.

 

That is why we have supported many local associations and charities this year. Help is one of the best things you can give. Thank you for your trust and appreciation of our people and solutions.

 

We wish you and your loved ones a peaceful and reflective holiday season and a prosperous New Year.

 

Yours, transfluid® Maschinenbau GmbH

Machines we used for the construction of the sledge.

We hope you enjoy the film. You can find out more about the machines used in the film here.

transfluid® t bend DB CNC-R/L

With our clockwise/counterclockwise bending machines the most complex bends become reality with great accuracy.

 

The Bending head of our fully electric CNC R/L series can be positioned horizontally and vertically, including 360° rotation axis for a change of bending direction (right- or left-hand).

 

For better efficiency. The electric axes can be programmed in synchronicity to give optimum cycle times.

 

Further Information

T FORM - Collaring machine AM-854

transfluid® has created a solution that makes necking out possible with standardized tools that are freely available on the market.

This significantly reduces the cost of changing wear parts and ensures manufacturer-independent procurement. The transfluid® AM-854 necking machine can be used both as a manually operated stand-alone solution and as part of a production line.

 

The advantages of this technology are manifold. For example, in contrast to a T-fitting connection, only one weld is required. Outlets can be set tighter and the probability of leaks is reduced by two thirds.