With system: Large-screen TV for control-assured tube machining
Watch TV during work? It's possible with our newly developed production cells. The large screen of the fully automatic system for the production of air conditioning lines may not broadcast a popular television series, however it presents even more valuable information. For the purpose of efficient processes the image on the TV screen constantly changes between the CPK value, energy consumption, number of tubes that have been processed so far and the part being produced.
Precise tube forming in the camera's view
The precisely produced air conditioning lines show forming with very tight tolerances. Our specially tailored tube processing systems therefore offer not only the camera but also a magazine, two combination machines for tube forming, a 4-axle handling system, a powerful tube bending machine, as well as a de-burring unit, two robots and a dot matrix printer.
100 % documented quality
During the process our automation system always processes one side of the desired tube with a tube forming machine, in a tailored combination of axial and rotary forming. After the bending process, the production cell cuts the second side without burrs and forms this too. If necessary, the robot then holds the part in a de-burring mechanism.
The camera optically checks both ends. Alternately, the robot holds the tube in a unit in which the tube can be marked in all positions. It is also possible to connect two tubes with each other via a flange. This is carried out by a tube forming system with rotary indexing table. 100 percent documented quality therefore guarantees a high degree of assurance and high output.
+49 29 72 / 97 15 0
+49 29 72 / 97 15 11