t work - Mobile bending machines Transportable, versatile and thoroughly tried and tested
Fast set-up- Simple operation, with preset bending angles
- Robust and transportable
- Special tool profiles to bend thin-walled tubes
- Option to correct the bending angles
The right machine for your task
Product video
MOBILE AND COMPACT PIPE MACHINING
| Range | 6–42 mm |
| Max. capacity | 42 x 4 mm (mild steel) 42 x 3 mm (stainless steel) 25 x 3,175 mm (Square section) |
| Max. Radii | 104 mm |
| Usable length | 1524 mm 3048 mm (standard) 4572 mm 6096 mm |
| Speed of bending axis | 13 °/sec. |
| Range | 6-60 mm |
| Max. capacity | 60 x 4,8 mm (mild steel) 35 x 3 mm (stainless steel) 38 x 3 mm (square mild steel) |
| Max. Radii | 178 mm |
| Usable length | 4572 mm 6096 mm (standard) |
| Speed of bending axis | 35 °/sec. |
| Range | 6-60 mm |
| Max. capacity | 90 x 3 mm (mild steel) 90 x 1,8 mm (stainless steel) 54 x 4 mm (square mild steel) |
| Max. Radii | 240 mm |
| Usable length | 3048 mm (standard) 4572 mm 6096 mm (special) |
| Speed of bending axis | 100 °/sec. |
| Range | 6-115 mm |
| Max. capacity | 115 x 4,5 mm (mild steel) 115 x 3 mm (stainless steel) on request (square mild steel) |
| Max. Radii | 360 mm |
| Usable length | 6096 mm (standard) |
| Speed of bending axis | 15 °/sec. |
Your benefits at a glance
-
ROTATABLE BENDING UNIT
for ergonomic working, reduction of tube swiveling range
-
DE-BURRING MACHINE
The separation cut is made directly after the last bend. No further re-cutting is necessary.
Capacity:
For tubes from 1/4“ - 1 5/8“
Machine equipment-/basic accessories:
de-burring tools
De-burring heads easily sharpened and adjusted
Internal de-burring tool with 3 HSS edges
External de-burring tool with 1 HSS edge
-
Carriage for cutting ring pre-assembling & flaring
For tubes from 1/4“ - 1 5/8“
For pre-assembling single and multi bite rings according to DIN 2353
-
FOR INDIVIDUAL PIPING
Optimized sheet quality due to special tools for hydraulic piping
-
FOR STEEL & STAINLESS STEEL PIPES
Product range for pipes from 6-168 mm in several gradations
-
FLANGING FUNCTION 10° & 37°
Standard tools available on the market can be used.
-
COLLET CHUCK
For 360° rotation by scale, with 4 adjustable stops
With chuck clamp for all sizes up to 3“
Inclusive length stop device with scale and 4 adjustable stops
Usable length 20 ft
-
CROSSCUT SAW
Attachment saw for right angle cuts.
Stable, flexible and economical.
This series will win you over with its special stability and performance. Individual pieces and small series can be produced in an extremely economical manner with this machine concept. The use of high-value components ensures the machine‘s durability.
ALTERNATIVE DRIVE
Optionally a pneumatically driven variant for the offshore sector.
